LT Storage Estimator


The LT Storage Estimator and Model Number Configurator is a tool that allows you to evaluate the impact on the Rapid Eye Multi-Media LT system while storing Video, Audio and Data in the Remote Unit. The configurator also generates a model number that represents the product most suitable for your application.

Storage Estimation: The tool is broken down into three sections:

Section 1 - Video Recording

  

Each camera is individually definable for camera type, ips, quality level and motion detection. You can also define a "Default Configuration" and load that on to as many cameras as you choose by defining the Default Configuration and then pressing the "Set Default Configuration" button.

Once a default configuration is loaded, you can still set the individual camera settings to fine-tune your estimate. You can also reset back to the default configuration at any time by pressing the "Set Default Configuration" button again.

Section 2 - Audio Recording

  

Consists of four check boxes, "Listen & Talk" for each channel.  Simply click in the appropriate box to enable the settings desired.

Section 3 - Data Recording

  
Consists of four check boxes, one for each possible POS channel. Simply click in the appropriate number of boxes to enable the setting desired. The pull-down menu below each box allows you fine-tune the estimate based on the Characters/Second for each data channel.

Model Number Configuration:

  

In the upper right hand corner are two required fields that are used to generate a suggested Remote Unit Model Number.  The Model Number displays in the lower left hand corner of the estimator as the "Suggested Remote Unit," as follows:

  1. Enter Desired Recording Days (default is 30)

  2. CD-RW Option - "Yes" or "No" (pull-down menu)

Printing:

The results are printable and will fit on a standard 8.5 x 11 sheet in landscape mode.  At the lower left corner of the printout, the date of the estimate will automatically print the date of the calculation.

 
Search