Keyboards & Controllers - Software Downloads |
 |
Below are the available software downloads from Honeywell Video Systems. You will
need the Winzip Software to view most of
these downloads.
UltraKey Configurator Installation CD
Copy the file to your PC. Uninstall the old version first. The firmware for the UltraKey is also on the CD and needs to be upgraded to work with the new configurator.
Code Server Version 3
The code server allows the firmware in the HEGS5000/5001, HEGS5BLX and KEGS5000 Small System Controller to be updated through the RS232 port of a PC or laptop.
HEGS5000/5001
Save this to the following directory on your PC: C:\Program Files\Ultrak Code
Server\CCTV\KEGS5000. Locate the file and double click it to automatically
extract this file to the default Code Server directory. C:\Program files\Ultrak
Code Server\CCTV\KEGS5000. Alternatively left click the link and select "Run
from Server" this will then install the firmware to the Code Server default
directory on your PC.
New firmware for the HEGS5000/5001 controller can be downloaded through the
RS-232 port. This is done through a simple windows program called Ultrak Code
Server.
To download the latest version of the HEGS5000/5001 firmware, click the
latest version and select "Open." This will open Winzip and install the firmware
to the default directory (C:\Program Files\Ultrak Code Server\CCTV\HEGS5000). If
Code Server was installed to a different drive, select the drive prior to
installing.
HEGS5BLX
New firmware for the HEGS5BLX controller can be downloaded through the RS-232
port. This is done through a simple windows program called Ultrak Code Server.
To download the latest version of the HEGS5BLX firmware, click the latest
version and select "Open." This will open Winzip and install the firmware to the
default directory (C:\Program Files\Ultrak Code Server\CCTV\HEGS5BLX). If Code
Server was installed to a different drive, select the drive prior to installing.
KEGS5000 Controller
Save this to the following directory on your PC: C:\Program Files\Ultrak Code Server\CCTV\KEGS5000. Locate the file and double click it to automatically extract this file to the default Code Server directory. C:\Program files\Ultrak Code Server\CCTV\KEGS5000. Alternatively left click the link and select "Run from Server" this will then install the firmware to the Code Server default directory on your PC.
KEGS5000 Slave Firmware
Slave firmware is required when the KEGS5000 is used with the MXSYS04E Ethernet System Controller or the KSX32080 Video Matrix.
|
