Digital Video Recorder - Software Downloads

Firmware upgrade instructions:

DVMS 100 Firmware 2.51G Update Product Bulletin (pdf)

(Formerly known as DVMS Duplex 1600/800)

(Note: HRDV 16/8 Firmware Version 4.1 contains modifications to adapt to the new USA day light saving changes starting on March 11, 2007. If your DVR is located in a time zone affected by the new USA modified day light saving time you should install this version of software.)

	HRDV 16/8 Firmware Verison 4.10G (.bin, 2.82 MB)
	RAS 4.0 Email Alert Software (.zip, 5.01 MB)
	HRDV 16/8 and HRDVS RAS (Remote Access Software) - Version 4.10 (.zip, 11.6 MB) 02/23/07

Firmware and RAS upgrade instructions:

HRDV Firmware and RAS Software Upgrade App Note - PDF (.pdf, 274.2 KB)

(Formerly known as DVMS Simplex 1600/800/400/100)

(Note: HRDVS Firmware Version 1.20g contains updates to improve DVR robustness when operating in networks that ping the site frequently.)

RAS upgrade instructions:

HRDVS (DVMS Simplex) Firmware Upgrade Procedure (pdf)

Note: Rapid Eye DVR software Versions 7.0.81 and 6.2.0.60 contain modifications to adapt to the new USA daylight saving changes starting on March 11, 2007. If your DVR is located in a time zone affected by the new USA modified daylight saving time you should install one of the following versions of software.

It is also important to apply the Microsoft Windows DST upgrades to your PC
Follow the instructions provided by Microsoft on the link below to update your specific Operating System

Note: Rapid Eye V9 MM, DSP and AA DVRs are based on the new generation 3 of the Rapid Eye hardware and are designed to run firmware v9 and higher (firmware is the software running on the unit itself). Rapid Eye V9 MM, DSP and AA DVRs CAN NOT use older versions of the firmware such as v8.X or v7.X. Rapid Eye generation 3 hardware can be recognized by the availability of 2 USB ports under the front lid on the front panel.

You can upgrade your Admin & View, OneAdmin & View, or View-only V7, V8 and V6 software to Version 9.

Version 9 Admin and View software is compatible with Remote Rapid Eye DVRs running V9, V8, V7 or V6 software.

You cannot upgrade a Rapid Eye DVR from V6 or V7 or V8 to V9.

All V9 software already contains the DST update.

Use the following link if you need to upgrade an existing Rapid Eye V9 DVR to V9.0.29 and to upgrade your ADMIN & VIEW, or VIEW-only software to V9.0.29.

Software upgrade package containing DVR SW 9.0.29 and Admin and View upgrade SW V9.0.29 (.zip, 136.71MB) 06/14/2010

Use the following link to install a default new version of ADMIN and VIEW V9.0.29.

Note: The use of the latest Rapid Eye ADMIN and VIEW applications is always recommended regardless even if you are using an older SW version on the DVR.

Admin and View and DVR Upgrade instructions:

1. Download the appropriate software package (DVR +ADMIN and VIEW or just ADMIN and VIEW) by clicking on the link above.

2. Extract the ZIP file to a local folder in your PC, e.g., C:\Upgrade.

3. Upgrade your Admin & View, OneAdmin & View, or View-only application by running C:\ Upgrade\REMUpgrade90.exe. Please consult the Rapid Eye User Guides for detailed information.

4. Upgrade the DVR.

Additional notes:

• It is critical to upgrade Admin and View software to v9.0.29 before upgrading the DVR unit.
• It is important to upgrade all the Admin and View installations to the latest v9.0.29.
• You cannot upgrade a Rapid Eye DVR from V6 or V7 or V8/V8.1 to V9
• Only Rapid Eye DVR V9 can be upgraded to V9

Note: Rapid Eye V8 DSP and AA DVRs are based on generation 2 of the Rapid Eye hardware and CAN NOT be upgraded to version 9 of the firmware (firmware is the software running on the unit itself) as version 9 of the firmware is designed to run exclusively on Rapid Eye generation 3 units sold as Rapid Eye V9. Rapid Eye generation 3 hardware can be recognized by the availability of 2 USB ports under the front lid on the front panel. Rapid Eye V8 units are lacking these 2 front USB ports.

You can upgrade your Admin & View, OneAdmin & View or View-only V7, V8 and V6 software to Version 9.

Version 9 Admin and View software is compatible with Rapid Eye DVRs running V9, V8, V7 or V6 software.

You cannot upgrade a Rapid Eye DVR from V6 or V7 to V8 and Rapid Eye DVR V8 to V9. .

All V8 software already contains the DST update.

Use the following link if you need to upgrade an existing Rapid Eye V8 DVR to V8.1.51 and to upgrade your ADMIN & VIEW, or VIEW-only software to V9.0.29.

 For New USA DST compliance for Rapid Eye running Version 7, please download the DST upgrade package from the link below:

Note –a License Key is no longer required to Upgrade V5/V6 software to V7.   Prior to  Admin and View V8.0.82  software, If you attempted to upgrade a Rapid Eye DVR running an earlier version of software to Version 7 (V6 or V5), you required a license key for each DVR unit you planned on upgrading. This is no longer necessary as of Version 8.0.82 .It is critical you first update your Admin and View software to 8.0.82 before upgrading the DVR unit or you will still be prompted for a license key.
 

Rapid Eye V7.0.81 SW downloads:

Download the Unit upgrade and the Admin & View upgrade in one compressed ZIP file:

Update instructions:

Rapid Eye Upgrade Procedure - B (.pdf, 1,073 KB)
05/07/09

The following software contains:

a. The upgrade for Rapid Eye Admin & View, OneAdmin & View, and View-only software to Version 8. New Admin and View features and modifications are being done only in Version 8.

b. The upgrade for the DVR software to Version 6.2.0.60.

Update instructions:

NOTE! For full DST compliance, please upgrade the DVR SW and the Admin & View, OneAdmin & View, or View-only SW running on all the PCs used to remotely access the Rapid Eye DVRs.

1. Download the Rapid Eye Upgrade ZIP file by clicking on the link above.

2. Extract the ZIP file to a local folder in your PC (for example, C:\DST_Upgrade).

3. Upgrade your Admin & View, OneAdmin & View, or View-only application by running C:\DST_Upgrade\REMUpgrade60.exe. Please consult the Rapid Eye User Guides for more detailed information. This upgrade can also be done with the CD created in step #4B below.

4. Upgrade your Rapid Eye Multi-Media DVRs from either a remote Maintenance session or with a CD at the local DVR as follows:

4A. Remote Maintenance session
When prompted for the location of the Upgrade folder, point it to C:\DST_Upgrade\RU\Upgrade. Consult the User Guides for details.

4B. With a CD at the local DVR
Record the contents of C:\DST_Upgrade into a CD-R. Make sure to select, in the CD recording SW, the option to close the session and close the CD when the recording is complete. Insert this CD in the Rapid Eye Multi-Media DVR's CD tray and reboot the unit. Please wait until the upgrade is complete and the unit becomes operational.

Fusion Standard Remote Management Software

Fusion standard remote management software Fusion Remote v4.00.0400 (.zip, 37.79 MB) 12/04/09

Fusion HFVMS Multi-site Software

Fusion multi-site remote management software FVMS v4.00.2204 (.zip, 64.92 MB) 01/15/10

IMPORTANT: Regardless of the platform being accessed (Fusion, Rapid Eye or HRDP), HFVMS software requires to be licensed to operate properly.

Fusion:

License to run FVMS on ONE workstation and access multiple Fusion DVRs is included with the purchase of every Fusion DVR. The HFVMS software operates for 30 days after the initial installation. A proper license key must be obtained during this 30 day time period. Please refer to HFVMS installation manual for details of how to obtain license key.

Rapid Eye:

A license to access Rapid Eye units is obtainable by purchasing part number HFVMSR.

Note: When upgrading an older version of HFVMSR software and you have installed a license key to access Rapid Eye DVRs, you must contact Honeywell Video Technical Support before the installation of HFVMS v3.6.1801 or higher. Technical support has to verify your existing HFVMS installation using your current valid license key; prior to issuing a new license key. Your current registration code will not work with HFVMS v3.6.1801 of higher.

HRDP:

A license to access HRDP units is obtainable by purchasing part number HFVMSP.

Fusion DVR Server software version IV

IMPORTANT: The following Fusion IV DVR server software is for download ONLY for upgrading Fusion III & Fusion IV DVRs. This is because Fusion I & II DVRs DO NOT support Fusion IV software.

IMPORTANT: If you are upgrading a Fusion DVR connected to a Honeywell WIN-PAK system, contact Technical Support (1-800-323-4576) in advance of upgrading the Fusion DVR software. This is necessary to address the Fusion IV API additions with WIN-PAK system integration. Fusion IV software does not support interface to Pro-Watch, see Fusion DVR Server software version III notes, below.

NOTE: Should you require Fusion IV Server Software, please contact Technical Support 1-800-796-2288 and select Option 2.

Fusion DVR Server software version III

IMPORTANT: If you are using a Pro-Watch 3.7x system and wish to extend to interface to a Fusion IV DVR for video surveillance, Fusion 3.71.0505 software can be installed on the Fusion IV DVR hardware platform and is required for Fusion to interface to Pro-Watch. NOTE that Fusion 3.71.0505 has a maximum capture rate of 120IPS when IP cameras are configured. Fusion 3.71.0505 can handle only one or two IP cameras at most due to performance limitations. We DO NOT advise the use of IP cameras on Fusion 3.71.0505 (with or without Pro-Watch). DVR configuration will be lost upon removing Fusion IV software and loading Fusion 3.71.0505. Contact Technical Support (1-800-323-4576) in advance of changing the Fusion IV DVR software to Fusion 3.71.0505.

Fusion DVR Server software version 3.71.0505 (.zip, 123.11 MB) 0714/2010

The following Fusion III DVR server software is for download ONLY for upgrading Fusion I and Fusion II DVRs. This is because Fusion I & II DVRs DO NOT support Fusion IV software.

	Fusion DVR Server software version 3.50.2408 (.zip, 119 MB) 09/18/09 - Latest recommended upgrade for Fusion 2 hardware platform
	Fusion DVR Server software version 3.01.0605 (.zip, 89.6 MB) 09/18/09 - Latest recommended upgrade for Fusion 1 hardware platform

The Digital Media Recorder is an application package that manages the recording of video from the servers, storage of the recordings created, and playback on demand of those recordings. It is accessed and controlled remotely by client applications running on PCs that are connected to the same IP network.

Please note: This product is discontinued

AHDR USB-IDE hard disk drive and USB CD-RW drive Upgrade

Upgrade any unit within the family of AHDR digital recorders to enable back up of video to a USB CD-RW drive.

Supported Drives:

Plextor PX-4824TU series
Plextor PX-4012TU series
Yamaha CRW-F1UX series
CD-R disk may be used

Please read all software setup procedures below prior to installation.

AHDR Series Upgrade Procedure (pdf)

AHDR Series Archiving Procedure (pdf)

Software Upgrades

Note: The AHDR-1 currently requires the operator to manually change the time if the unit is in a time zone that will be affected by the new USA modified day light saving time commencing on Mar 11 2007. Consult your users manual for a procedure on how to do this.

The name service program works with the following HRHD DVR's running the most current embedded firmware on this website.

If you use dynamic IP addressing for your DVR's (DHCP), you can have the DVR register any change of its Dynamic IP automatically with the following Name Server Program. Your HRHD RAS software can be set to check with this DVRNS program for the current up to date IP address of the DVR's.

Click below to download the HRHD+ series DVRNS program
Note:For this to work reliably the DVRNS server program must be installed on a PC using a static IP address.

IMPORTANT: If you have FVMSR software installed and licensed to access Rapid Eye DVRs, you must contact Honeywell Video Technical Support before the installation of HFVMS v3.6.1801. Technical support has to verify your existing HFVMS installation using your current valid license key; prior to issuing a new license key. Your current registration code will not work with HFVMS v3.6.1801.

Software Upgrades – HRDP4/8/16-D

Software Upgrades – HRDP4F

HRDP4F DVR Upgrade v3.0.0.31-1 (.zip, 24.28 MB) 09/11/09

HRDE 4x4 User Guide (pdf)

Software Upgrades